With the popularity of aluminum composite panels, we can clearly see that: Aluminium composite panel processing performance is very strong, and structural characteristics are clear, whether decorative or practical from the past to now is the leading building materials. But many people do not know what the staff needs to pay attention to before the construction of aluminum composite panels. Now let the professional aluminum composite panel manufacturers Aluminobond for everyone to briefly explain: Aluminobond needs to be prepared before installation.
Distinguish the interior and exterior wall aluminum composite board
In general, Aluminobond aluminum composite panels are 4mm thick and 0.25mm thick for exterior wall decoration. Only in this way can the quality of the decoration be guaranteed. Indoor use of indoor special ALUMINOBOND aluminum composite panel below 0.25mm can reduce decoration costs.
Inspection of accessories
Before the construction, check the horizontal and vertical connectors, measure and adjust to reduce the error of aluminum composite panel installation.
In strict accordance with the instructions to install aluminum composite panel
Aluminobond aluminum composite panel must be installed in the same direction as the arrow on the protective film in the same direction to avoid color difference; the protective film on the plate must be removed in accordance with the date marked on the protective film to prevent the aging of the protective film, and it is difficult to remove and affect the appearance.
The structural rivets are to be carried out outdoors. The diameter of the stem should be 5mm, and the diameter of the rivet head should be 11mm to 14mm. When riveting aluminum composite panels, it is recommended that the panel be fixed in order from the middle to both ends, and considering that the panel will expand and contract when the temperature changes, the aperture above the composite panel should be approximately 1mm larger than the diameter of the rivet to ensure the flatness of the aluminum composite panel;
Rubber operation should not be carried out during rainy days. The silicon germanium weatherproof adhesive should be filled with fullness and should be carried out in an environment with a temperature of 15°C to 30°C and a relative humidity of 50% or more.